Profiles (2009/03/07 23:17)

Bolts
DIN558, DIN931, DIN933, DIN601, DIN6914, DIN7990, DIN912, DIN6912, DIN7984, DIN84, din7991, DIN963, DIN965, DIN7968, DIN7969, DIN835, DIN908, DIN85, DIN316, DIN427, DIN561, DIN564, DIN580; DIN603, DIN938, DIN939, DIN940, DIN960, DIN961, DIN964, DIN966, DIN6921, DIN6922, DIN 7604, DIN7964, DIN7985, DIN1207, DIN1580, DIN2009, DB2010, DIN7045, DIN7046, DIN7047, DIN24014, DIN24017, DIN24018, DIN28676, DIN28765; ISO 7380
Nuts/mothers
DIN555, DIN934, DIN6915, DIN982, DIN980 form M/V, DIN982m, DIN985, DIN7967, DIN582, DIN935, DIN508, DIN1804, DIN315, DIN557, DIN562, DIN917, DIN929, DIN936, DIN937, DIN979, DIN986, DIN1587, DIN6330, DIN6331, DIN24032, DIN24035, DIN24036, DIN28673 type 1, DIN28673 type 2, DIN28675
Seals
DIN7603 form A, DIN7603 form B, DIN7603 form C, DIN3760 form A, DIN37960 form AS
Washers
DIN125 form A/B, DIN126, DIN433, DIN6916, DIN7989, DIN6797 form A/J, DIN6798 form A/J/V, DIN434, DIN435, DIN6917, DIN6918, DIN988 form A/S,
DIN137 form B, DIN137 form A, DIN1440, DIN6340, DIN7349, DIN9021
Adjusting springs
DIN6885 form A, DIN6885 form B, DIN6885 form C, DIN6885 form D, DIN6885 form E, DIN6885 form F, DIN6885 form G, DIN6885 form H,

Tension rings
DIN705 A, DIN705 B, DIN705 C
Spring washers
DIN127 form A/B, DIN 7980, DIN128 form A/B
Stud bolts
DIN913, DIN914, DIN915, DIN916, DIN417, DIN551, DIN553, DIN926, DIN24766, DIN27434, DIN27435
Guard rings
DIN471, DIN471 form T2, DIN472, DIN472 form T2. DIN6799
Friction bearings
DIN1494, DIN1850 form U, G, J, V, K, M, N, P, R, S and T
Cylindrical pins
DIN7, DIN6325, DIN7979, DIN22338 form A, B and C, DIN28734 form A and B
Tapered pins
DIN1, DIN22339, DIN7978
Tightening pins and clamping sleeves
DIN14481, DIN7346, DIN28752
Screws
DIN1444 form A and B, DIN22340 form A and B, DIN22341 form A and B
Steel assembly profiles
DIN1027 Z-steel
Bearings
Grooved

Profiles
WUG rolled DIN 1029
WUG edged DIN 1029
WGL rolled DIN 1028
WGL edged DIN 1028
INP DIN 1025
IPE DIN 1025 T5
HEA (IPBL) DIN 1025 T3
LIFT (IPB) DIN 1025 T2
HEM (IPBV) DIN 1025 T5
UNP rolled DIN 1026
UNP edged DIN 1026
UPE DIN 1026